For Chevrolet Blazer 2019-2024 Front Inner Fender Liner Right Side

Description

2019-2024 Chevrolet Blazer Front Right Inner Fender Liner Replacement

This front right inner fender liner is made for the 2019-2024 Chevrolet Blazer and fits the passenger side of the vehicle. Whether the original was cracked in a minor collision, damaged by road debris or simply lost, this replacement lets you bring the Blazer back to its factory condition without paying dealership prices.

The inner fender liner, also called a splash shield or wheel well liner, sits inside the wheel opening between the tire and the engine bay. It keeps water, mud, road salt and stones away from wiring, the headlight backs and the inner body structure. For other vehicles and positions, see our wheel well liner replacements. A torn or missing liner leaves those parts exposed and can also let debris collect where it causes corrosion.

Signs that the liner needs replacing include torn or missing sections, a liner that hangs down and rubs the tire, broken mounting tabs and missing fasteners. A damaged liner can also make extra road noise and let water spray onto parts that should stay dry, so it is worth replacing as soon as the damage is found.

This part is listed for the Chevrolet Blazer in the following model years: 2019, 2020, 2021, 2022, 2023 and 2024. It is for the passenger side (right) of the vehicle. Partslink interchange: GM1248298. We stock a range of other Chevrolet parts, so it is easy to source everything for the repair in one place. Before ordering, compare the part with the original or check the part number on your existing piece to make sure it matches your trim and options.

Here is what you get with this front right inner fender liner for the Blazer. This is the right-hand (passenger side) part; the opposite side is sold separately. The Partslink reference is GM1248298. It is listed for the 2019-2024 Chevrolet Blazer.

• Vehicle Compatibility: 2019-2024 Chevrolet Blazer
• Model Years: 2019, 2020, 2021, 2022, 2023, 2024
• Part: Front Right Inner Fender Liner
• Position: Front Right (Passenger Side)
• Partslink Number: GM1248298
• SKU: CH-BL-1924-L-FR

Fitment and Installation Notes for the Blazer Liner

Turning the steering wheel fully to one side gives easier access to the wheel well. Remove the old liner fasteners, take out the damaged liner and check for any broken clips. Position the new liner in the wheel well, start the fasteners at the factory locations and tighten them once the liner is sitting in the correct position.

Inner fender liners are often overlooked, but they play an important role in protecting the engine bay and inner body from water, salt and debris. A liner that fits the factory mounting points stays secure and is less likely to rub against the tire. It is a good idea to check the opposite side and replace any broken fasteners at the same time.

If the other side is also damaged, the matching driver-side fender liner for the Blazer lets you replace both together for an even, consistent look. While this area of the Blazer is apart, it is a good time to check related parts such as the 2019-2024 Chevrolet Blazer front right fender panel. If you are not sure about fitment, have your VIN and the number from your original part ready before you order.

Taking a minute to confirm the year, side and part number before ordering avoids delays and gets your Blazer back on the road sooner.

Choose this fender liner when you want a direct replacement for your Chevrolet Blazer rather than a universal part. Confirm the year and side, then add it to your order.