For Chevrolet Blazer 2019-2024 Front Inner Fender Liner Left Side

Description

2019-2024 Chevrolet Blazer Front Left Inner Fender Liner: Direct-Fit Replacement

Looking for a replacement front left inner fender liner for a 2019-2024 Chevrolet Blazer? This fender liner is designed specifically for the Chevrolet Blazer and fits the driver side of the vehicle, following the original part’s shape and mounting layout.

The inner fender liner, also called a splash shield or wheel well liner, sits inside the wheel opening between the tire and the engine bay. It keeps water, mud, road salt and stones away from wiring, the headlight backs and the inner body structure. It is part of our wider selection of fender liners and splash shields. A torn or missing liner leaves those parts exposed and can also let debris collect where it causes corrosion.

Signs that the liner needs replacing include torn or missing sections, a liner that hangs down and rubs the tire, broken mounting tabs and missing fasteners. A damaged liner can also make extra road noise and let water spray onto parts that should stay dry, so it is worth replacing as soon as the damage is found.

This part is listed for the Chevrolet Blazer in the following model years: 2019, 2020, 2021, 2022, 2023 and 2024. It is for the driver side (left) of the vehicle. Partslink interchange: GM1248298. We stock a range of Chevrolet body parts and trim, so it is easy to source everything for the repair in one place. Before ordering, compare the part with the original or check the part number on your existing piece to make sure it matches your trim and options.

Here is what you get with this front left inner fender liner for the Blazer. This is the left-hand (driver side) part; the opposite side is sold separately. The Partslink reference is GM1248298. It is listed for the 2019-2024 Chevrolet Blazer.

• Vehicle Compatibility: 2019-2024 Chevrolet Blazer
• Model Years: 2019, 2020, 2021, 2022, 2023, 2024
• Part: Front Left Inner Fender Liner
• Position: Front Left (Driver Side)
• Partslink Number: GM1248298
• SKU: CH-BL-1924-L-FL

Installing Your Blazer Fender Liner

Most liners can be replaced with basic hand tools. Raise the vehicle safely or turn the wheels for access, remove the old liner and its fasteners, and clean out any built-up debris in the wheel well. Fit the new liner into the opening and secure it at the original mounting points, replacing any broken clips at the same time.

Inner fender liners are often overlooked, but they play an important role in protecting the engine bay and inner body from water, salt and debris. A liner that fits the factory mounting points stays secure and is less likely to rub against the tire. It is a good idea to check the opposite side and replace any broken fasteners at the same time.

Many repairs involve more than one part, so it is worth checking the surrounding components while the vehicle is apart. If the other side is also damaged, the matching passenger-side fender liner for the Blazer lets you replace both together for an even, consistent look. While this area of the Blazer is apart, it is a good time to check related parts such as the front left fender panel for the Chevrolet Blazer.

When you order, double-check the model year, the position on the vehicle and, where shown, the OEM reference number. Matching these details is the simplest way to make sure the replacement arrives ready to install on your Chevrolet Blazer.

For a repair that looks right and fits the factory mounting points, this front left inner fender liner for the 2019-2024 Chevrolet Blazer is a straightforward choice. Order it with confidence once you have confirmed your fitment details.